PRODUCT INFO
Japan Bonkote Co.Ltd
Measuring Instrument
MCA700II
MCA900II
MCA700II
Measurement Instrument for soldering iron
Temperature Measurement
ー
ー
Temp. measurement
Sensor Unit
SAT-1
ー
Replacement sensor
SC-006
(5pce/pack)
Leak voltage and Earth line resistance Measurement
Leak voltage
Earth line resistance
Terminal Unit
MTU-1
ー
Replacement LR pin
LR-01
(5pcs/pack)
● Purchase price includes "Initial calibration" "SAT-1" and "MTU-1".
● Regular calibration is chargeable. Please inform us in advance your calibration schedule.
● "SC-006" and "LR-01" are packed in 5pcs respectively.
● Please advise voltage you need. (e.g. MCA-700Ⅱ-100V)
※ temperature sensor (SC-006), LR pin (LR-01) is a consumable item We recommend early replacement of those parts when deteriorations appear. (e.g. spread of solder, oxidation, strong dirt)
Features
■ Iron tip temperature, Leak voltage and Earth line resistance can be measured.
■ Any calculation is not necessary, but read the digital indication.
■ Sensors can be replaced quickly by one-touch plug-in method.
■ MCA-700Ⅱ allows you to perform the quality control meeting ISO-9000, QS-9000 and MIL std.
Specifications
Input voltage
AC100,120,220V
Dimension
180W×140D×70H
Weight
1380g
Temperature(Indication range)
0~600℃ 32~999F
Temperature(Precision)
±(4℃) Class 0.75 Type K ±(6°F)
Leak voltage
0.0~99.9mVAC
±(3%rdg+0.3mv)
Earth line resistance
0.0~99.9Ω
±(4%rdg+0.3Ω)
Excerpt from MIL-STD-2000
■ Electric resistance between the heated soldering iron tip and the grounding point of the workshop shall not exceed 5 Ω.
■ Electric potential difference between the heated soldering iron tip and the grounding point of the workshop shall not exceed 2mV(RMS).
■ The power supply shall use 3-cpre cable and the top-point grounding method.
■ Soldering irons shall be designed to hae a switch at 0 voltage.
■ Transformer type of soldering irons shall not be used.
MCA900II
ー
ー
how to use the iron tip temperature sensor unit?
Wipe the iron tip lightly with cleaner, and touch sensing part softly,putting a smount of solder on the iron tip.
NOTE: SPEC. change
MCA-900Ⅱ is going to delete the function of Fahrenheit.
Only the Celsius function is available.
● Purchase price does NOT include " Initial calibration".
● "Initial calibration" and all sensors are optional.
Features
■ As heat loss of the sensor is small, MCA-900Ⅱ can measure accurately even small iron tips.
■ This is a handy type that can be used for any kind of work.
■ We have three types of thermal sensors for various purpose.
各種センサー
Sensor for surface
SC-008
ー
Sensor for dlipping
SC-007
ー
Iron tip temperature sensor unit
SAT-1
ー
Specifications
Resolution
0.1℃(0~199.9℃)/1℃(All range of measurement)
Measurement range
0~1000℃
Detection edge
Type K
Measurement accuracy
±(0.3% rdg + 2℃)(23℃±5℃ body only)
Display
3.5 digits LCD display
Power supply
DC9V( Dry cell 006P x 1pc)
Battery life
250 hrs (alkaline battery is continuously used)
Operational conditions
0~40℃、≦80%RH
Dimensions
80W×48D×156Hmm(body only)
Weight
305g
Introduction
You can measure temperature of iron tip, Leak voltage and Earth line resistance by this instrument only.
定期校正のご案内
対象機種:日本ボンコート(株)製の全計測器(MCAシリーズ他)
定期校正の大切さ
弊社製品含めどのような計測器においてもその計測値は経年の変化により正しい値と徐々に「ズレ」が生じてくる事があります。「ズレ」が生じた計測器ではその計測は無意味なものになってしまいます。
弊社ではより正確な計測値を維持するための定期的な校正を推奨致しております。
校正の周期について
校正周期について各種法令及び規格で定められてはおりません。 原則として計測器の 管理者様がお決めになる事となっておりますが、弊社としましては1回/年の定期校正を ご推奨致しております。
校正作業の品質について
弊社では下記の管理体系に基づき、国家標準にトレースされた標準器で校正~出荷を実施 し、測定確度を保証致しております。
国家標準
照合用
標準器
社内
常用器
校正作業
定期校正 (JCSS)
定期校正(社内)
ご提供の書類について (全て基本料金に含まれます。標準基本価格: ¥9,000-)
1. 校正証明書
2. 試験成績表
3. トレーサビリティ体系図
※要期は1週間程度です。